Matchbox Takeoff Adventure Playset Setup Guide

Quick answer

Set up the Matchbox Takeoff Adventure Playset by assembling the runway and control tower, then use the lever to launch the airplane while keeping the track clear for smooth operation.

How to set up and play

1. Assemble the runway and control tower: Connect the runway pieces to the control tower base. Ensure the track clips snap firmly; a loose connection can cause the car to derail. Check that all tabs click into place before moving to the next step.
2. Place the airplane on the launcher: Slide the plastic airplane onto the launcher clip until it clicks. The clip must engage fully or the plane may not release during takeoff. If the plane doesn't clip, rotate it 180° and try again.
3. Position the car on the runway: Put the Audi e-tron car at the starting point near the hangar door. Push it gently so it rolls toward the runway—do not force it. A stuck car usually means a track piece is misaligned; recheck the connections.
4. Operate the takeoff lever: Move the lever forward to send the plane down the runway. The plane will lift off and fly around the control tower. Press the button to let it descend automatically. If the plane stalls, the lever may not be fully pushed; ensure it reaches the end of its range.

Product details

• Matchbox Takeoff Adventure playset: The Matchbox Airport Takeoff Adventure Playset includes a die-cast Audi e-tron toy car and one plastic airplane. Kids can use the included car to taxi to the runway before launching the airplane, adding storytelling to the play sequence.