How to Display and Store MOTU Masterverse Figures

Quick answer

Display your MOTU Masterverse figures in a low-dust, UV-protected case and store them with removable parts detached to prevent stress on joints and accessories.

Step-by-step guide to displaying and storing your Masterverse figures

1. Choose a display location away from direct sunlight: Place your figures on a shelf or in a cabinet that does not receive direct sun. UV rays can fade paint and yellow plastic over time, especially on lighter-colored parts like Stratos's wings. A north-facing room or a shelf with UV-filtering glass is ideal.
2. Detach delicate accessories before long-term storage: Remove wings, harnesses, jetpacks, and extra hands from figures like Stratos. Store them in a labeled zip-top bag or small parts box. This prevents the accessories from bending or snapping under their own weight. Common mistake: leaving wings attached can stretch the peg holes permanently.
3. Use acrylic risers to create layered displays: Acrylic risers let you show multiple figures without stacking them. Place taller figures like Stratos (7-inch scale) on the back row and shorter ones like Zodac (5.5-inch scale) in front. This keeps every figure visible and reduces the chance of accidental knocks. Check that risers are wide enough to accommodate figures with wings or jetpacks.
4. Store figures in a cool, dry environment: Avoid attics, garages, or basements where temperature and humidity fluctuate. Extreme heat can warp plastic, while moisture can cause rust on metal joints or paint bubbles. A consistent room temperature around 65–75°F (18–24°C) is best. A dehumidifier in humid climates helps prevent sticky or brittle plastic.
5. Rotate poses periodically to prevent joint stress: If you keep a figure in a dynamic pose for months, the joints may loosen or stiffen. Every few weeks, gently move arms, legs, and wings through their full range of motion. For Stratos, this is especially important for the wing hinges. Set a calendar reminder to rotate poses every 4–6 weeks.

Product facts

• Masters of the Universe Masterverse Vintage Collection Stratos Action Figure: Stratos comes with two sets of wings and chest harness/jetpack in alternate colors, plus an extra set of hands. Store the unused set of wings and harness in a small compartment box to avoid losing them during rotation.

  

• Masters Of The Universe Cartoon Collection Zodac Action Figure: Zodac has 16 points of articulation and a removable harness, and is designed at 5.5-inch scale. The smaller scale and removable parts mean he fits well in a mixed display but requires careful handling to avoid snapping the harness pegs.