Hot Wheels RacerVerse Barbie Track Setup Tips

Quick answer

To set up the Hot Wheels RacerVerse Barbie Spiral Race Track reliably, start by finding a level surface, then build the kid-powered elevator and tune-up shop before connecting the spiral. Avoid common assembly mistakes like twisting the track sections or forcing connections.

Setup steps

1. Step 1: Choose a level surface: Place the track base on a flat, hard floor. Avoid carpet or uneven surfaces, as the spiral may lean and cause cars to stop mid-race. Test the surface by placing a marble on it; if it rolls, adjust the location.
2. Step 2: Build the elevator and tune-up shop: Assemble the kid-powered elevator tower and the tune-up shop section according to the manual. Ensure the elevator moves freely and the shop's ramp aligns with the elevator exit. Check that the elevator's handle turns smoothly before moving on.
3. Step 3: Attach the spiral sections: Connect the spiral track pieces one by one, starting from the top of the elevator and working downward. Snap each section firmly without twisting. If a section doesn't click, rotate it 180°—never force it.
4. Step 4: Add the finish line and stabilizers: Attach the finish line at the track's bottom, then clip the supplied stabilizer feet to the base. This prevents the track from tipping during fast runs. Run a test car without figures first to confirm the track stays stable.
5. Step 5: Insert the RacerVerse vehicles: Place Barbie 'Malibu' and Barbie 'Brooklyn' die-cast cars on the elevator. Push the elevator up and watch them roll through the spa, shop, and spiral. If a car stalls, check that the track is level and the elevator ramp isn't blocked.

Product facts

• Hot Wheels RacerVerse Barbie Spiral Race Track Set: The track includes a kid-powered elevator that carries the die-cast RacerVerse vehicles up to a pretend car spa and tune-up shop. This means the elevator must be assembled and tested before connecting the spiral, as its alignment affects the entire track's slope.